Chemical analysis of sourdough: pH and total titratable acidity (TTA)

2021. aug. 2.

Cikk

Like many, I am fascinated by the chemistry behind baking, and in this blog I want to talk about bread—sourdough in particular. There is a well-known saying in the baking industry: «The pH value bakes and the total titratable acidity tastes». Why are these two parameters important for baking bread, and how can they be determined in the best way? This is what I want to discuss here.

Figure 1. Cross section of a sourdough bread loaf.

A brief history of sourdough

Bread has been part of the human diet for several thousand years, although not necessarily in the forms we are familiar with today. One exception to this is sourdough bread. Wild yeast and bacteria (lactobacilli) ferment the dough naturally, creating a tangy loaf full of crevices. Despite originating in the Fertile Crescent, one of the oldest physical examples (at nearly 6,000 years old) was excavated in Switzerland, showing how widely it spread by that point already.

Currently, one of the places most well-known for its sourdough bread is San Francisco, in California. Why California? Bakers from France brought their techniques there during the Gold Rush in the mid 1800’s, and it has since become ubiquitous with the city. In fact, San Francisco has its own eponymous strain of sourdough bacteria: Fructilactobacillus sanfranciscensis.

Many home bakers try to make sourdough at some point, since the ingredients are simple and no leavening agent is used, except for what nature provides. However, with so many people at home during 2020–2021, it was an ideal time for many people to see what they could produce. The development of the starter is of key importance—if there is not sufficient wild yeast and bacteria (or they do not have enough nutrients), then the dough will not rise, and you are left with a dense, chewy result. (While much has been written about how to make the best homemade sourdough, I cannot contribute to this topic, as my own baking spree focused on the Swiss Butterzopf.)

Download the recipe below and try it out yourself!

Bake your own real Swiss Butterzopf

Figure 2. Chemical structure of lactic acid.

Lactobacilli: helpful bacteria

As their name suggests, lactobacilli produce lactic acid (Figure 2) and also acetic acid, and these give the sourdough bread its characteristic tangy, sour taste. The sourness of the bread also has positive effects on its shelf life, making it possible for our ancestors to preserve the bread for a longer time to supplement their diet.

There is another reason why the presence of this helpful bacteria is important. Without the lactic and acetic acid, it would be impossible to bake bread made from rye flour, which is commonly used in sourdough bread of northern Europe. How come?

Figure 2. Fermenting sourdough starter in a glass jar.

Starch is the key component within bread and influences the shape, crumb consistency, and overall flavor. During the baking process, gelatinization occurs between the starch within the flour and the water added to the dough. However, flour also contains the enzyme amylase, which catalyzes the hydrolysis of starch into sugar. During the gelatinization process, starch is more prone to hydrolysis by amylase. Strong amylase activity at this point will have detrimental effects on the bread crumb. For wheat, the amylase is already denatured at the temperature gelatinization begins within the dough. This is not the case for rye, which gelatinizes at a lower temperature when amylase activity happens to be the highest [1]. By making an acidic (sour) dough, the amylase activity is inhibited and it becomes possible to bake bread made from rye flour.

So how much acid is necessary and when is it too much? This question brings us back to the two key parameters, pH value and total titratable acidity (TTA), I mentioned in the introduction.

pH value regulates enzyme activity

The pH value is important to inhibit amylase in an optimal manner. Every enzyme has an optimal pH range in which it functions the most efficiently. For amylase, the optimal pH value (highest enzyme activity) ranges from pH 5.4 to 5.8. At a lower pH value its activity will be reduced.

The pH value can be easily measured using a pH electrode. For dough analysis, an electrode such as the Spearhead electrode which can pierce into the sample is the best sensor. As the pH value is temperature dependent, the sensor measures the temperature as well.

Spearhead electrode with Pt1000

What is the pH value?

The pH value is the negative logarithm of the hydronium concentration. Therefore, the smaller the pH value, the higher the hydronium concentration.

Pure water itself contains a small amount of free hydronium ions, and its pH value is therefore 7.

As acids release hydronium ions when they are in solution (dissociation), acidic solutions have pH values between 0 and 7.

Contrary to this, alkaline solutions and products have even less hydronium ions than pure water. They have pH values ranging from 7 to 14. An example of an alkaline solution is lye, which is used to produce lye rolls.

For more information on pH measurement check out our other blog posts here.

Avoiding the most common mistakes in pH measurement

How to calibrate a pH meter

Figure 4. A robust and compact titrator for the determination of the total titratable acidity

Total titratable acidity helps assess the taste

Why do we need to determine the total titratable acidity (TTA) if measuring and controlling the pH value is sufficient to regulate the amylase activity? This is because the pH value does not provide any information about the ratio of lactic acid and acetic acid present in the dough. While the amylase activity is not dependent on the ratio of the two, the composition is important for the taste. For optimal sourdough flavor, the ratio of lactic acid to acetic acid should lie between 3:1 and 4:1. If the ratio shifts towards containing more acetic acid, the taste usually becomes too sour.

Weaker acids such as lactic acid and acetic acid do not completely dissociate, meaning not all acid molecules present will release their hydrogen ion. As lactic acid is a stronger acid in comparison to acetic acid, more lactic acid will dissociate and thus contribute more to the pH value. By determining the TTA, it is possible to find out what the total amount of acids is within the dough.

For the determination of the TTA, dough is homogenized with water to obtain a suspension. It is then titrated to a pH value of 8.5 with 0.1 molar sodium hydroxide solution. The use of an automated titrator provides reliable results without human interference (Figure 4).

Before the titration starts, the pH value of the suspension can be determined easily, so you get both parameters (pH value and TTA) without needing to do double the work. For more detailed information on how the analysis is done, download our free Application Note.

pH value and TTA in flour, dough, and bread – Determination of the pH value and the total titratable acidity according to AOAC 943.02, 981.12, and AACC 02-31.01

If you would like to know why using an automated titrator is preferred over performing titrations by hand, read our blog post.

How to avoid titration errors in your lab

pH value and TTA for the perfect sourdough quality

By combining the information about the pH value and TTA it becomes possible to assess the quality of sourdough and thus maintain a constant quality in the final product, especially if delays in the production process occur.

It also becomes possible to detect changes in the sourdough starter which might occur if storage conditions cannot be maintained, and thus provide critical information when it is time to prepare a new starter.

**Table 1.** Common pH and TTA values for various kind of breads [1].
Bread type	pH value	TTA
Wheat bread	5.4–6.0	4–6
Wheat mixed bread	5.0–5.3	6–8
Rye mixed bread	4.5–4.8	7–9
Rye bread	4.3–4.7	8–10
Rye bread (coarsely ground)	4.2–4.6	9–14

Figure 5. Butterzopf (made by the author): a traditional Swiss bread usually consumed on Sundays for brunch.

Lessons learned

I hope this blog post on the chemistry of sourdough has given you some new insights on this fascinating kind of bread.

As for myself, I will probably not venture into the sourdough baking arena but stick with my homemade Butterzopf.

If you are interested in other information about yeast, check out our post about beer brewing, or if you have more of a sweet tooth then read our blog post about chocolate.

Making a better beer with chemistry

Chemistry of chocolate

Your knowledge take-aways

Flyer:The chemistry of bread

Chemical analysis of sourdough: pH and total titratable acidity (TTA)

A brief history of sourdough

Lactobacilli: helpful bacteria

pH value regulates enzyme activity

What is the pH value?

Total titratable acidity helps assess the taste

pH value and TTA for the perfect sourdough quality

Table 1. Common pH and TTA values for various kind of breads [1].

Lessons learned

Your knowledge take-aways

Lucia Meier

Kapcsolat

Kapcsolódó alkalmazások (100)

Kapcsolódó cikkek

Edible oil analysis: A guide for beginners

Is having a service agreement important?

History and analysis of vitamin C (ascorbic acid)

Coping with the daily challenges of routine water analysis