Electrode Finder

6.0910.120

Conductivity measuring cell with cell constant c = 0.9 cm-1, without integrated temperature sensor. This sensor is suitable for measurements of medium conductivities (1 uS/cm to 100 mS/cm), e.g., in: drinking water; surface water; wastewater; This sensor is suitable for automated applications (includes an SGJ 14/15).

6.0912.110

Conductivity measuring cell with cell constant c = 0.8 cm-1, with integrated Pt1000 temperature sensor and with fixed cable (4 x B (4 mm)). Thanks to the robust/break-proof plastic shaft made of polypropylene and an impact protection, this sensor is mechanically very resistant. This sensor is suitable for measurements of medium conductivities (1 uS/cm to 100 mS/cm), e.g., in: drinking water; surface water; wastewater; The sensor can be connected to an 856 Conductivity Module with the adapter box (6.2103.160).

6.0913.130

With built-in conductometric measuring cell.

6.0914.040

Conductivity measuring cell made of stainless steel with cell constant c = 0.1 cm-1, with integrated Pt1000 temperature sensor and with fixed cable (4 x B (4 mm)).This sensor is suitable for measurements of low conductivities (0 uS/cm to 300 uS/cm), e.g., in deion. water or for measurements in accordance with USP <645>.The sensor can be connected to an 856 Conductivity Module with the adapter box (6.2103.160).

6.0915.100

5-ring conductivity measuring cell with cell constant c = 0.7 cm-1 (guide value), with integrated Pt1000 temperature sensor and with fixed cable (1.2 m) for connecting to an 856 Conductivity Module.This sensor is suitable for measurements of medium conductivities (5 µS/cm to 20 mS/cm), e.g., in:drinking water; surface water; wastewater;

6.0915.130

5-ring conductivity measuring cell with cell constant c = 1.0 cm-1 (guide value), with integrated Pt1000 temperature sensor and with fixed cable (1.2 m) for connecting to an 856 Conductivity Module in combination with a sample changer.This sensor is suitable for automated measurements of medium conductivities (5 µS/cm to 100 mS/cm), e.g., in:drinking water; surface water; wastewater;

6.0916.040

Conductivity measuring cell made of stainless steel with cell constant c = 0.1 cm-1 (guide value), with integrated Pt1000 temperature sensor and fixed cable (1.2 m) for connecting to an 856 Conductivity Module.This sensor is suitable for measurements of low conductivities (0 µS/cm to 300 uS/cm) in e.g., deion. water or for measurements in accordance with USP <645>.

6.0917.080

4-wire conductivity measuring cell with cell constant c = 0.5 cm-1 (guide value), with integrated Pt1000 temperature sensor and fixed cable for connecting to 912/914 Meters.Thanks to the robust/break-proof plastic shaft made of PEEK, this sensor is mechanically very resistant. The sensor is suitable for measurements of medium conductivities (15 µS/cm to 250 mS/cm), e.g., in:drinking water; surface water; wastewater;

6.0918.040

Conductivity measuring cell made of stainless steel with cell constant c = 0.1 cm-1 (guide value), with integrated Pt1000 temperature sensor and fixed cable for connecting to 912/914 Meters.This sensor is suitable for measurements of low conductivities (0 µS/cm to 300 uS/cm) in, e.g. deion. water.

6.0919.140

3-ring conductivity measuring cell with cell constant c = 1.6 cm-1, with integrated Pt1000 temperature sensor and fixed cable for connecting to 912/914 Meters.This sensor is suitable for measurements of high conductivities (0.1 to 1000 mS/cm), e.g., in:sea water; flush water; physiological solutions;

6.0920.100

5-ring conductivity measuring cell with cell constant c = 0.7 cm-1 (guide value), with integrated Pt1000 temperature sensor and fixed cable (2.0 m) for connecting to an 856 Conductivity Module in combination with a sample changer.This sensor is suitable for automated measurements of medium conductivities (5 µS/cm to 20 mS/cm), e.g., in:drinking water; surface water; wastewater;

6.0920.130

5-ring conductivity measuring cell with cell constant c = 1.0 cm-1 (guide value), with integrated Pt1000 temperature sensor and fixed cable (2.0 m) for connecting to an 856 Conductivity Module in combination with a sample changer. This sensor is suitable for automated measurements of medium conductivities (5 µS/cm to 100 mS/cm), e.g., in:drinking water; surface water; wastewater;

6.09331.110

The ProTrode 200 sensor is a combined pH sensor with integrated Pt1000 designed to perform inline pH measurements biotechnology and pharmaceutical processes. This non-pressurized sensor has a measuring range from 0 – 12 pH and because of its unique sleeve diaphragm design, enables very accurate pH measurements with low response time’s independent of the process flow.The included Ag guard prevents silver fouling into the process and diaphragm blockage in processes containing sulfide or proteins.

6.09331.210

The ProTrode 300 sensor is a combined pH sensor with integrated Pt1000 designed to perform inline pH measurements in biotechnology and pharmaceutical processes. The pressurized sensor has a measuring range from 0 – 12 and ceramic pin diaphragm design, which enables accurate pH measurements, with good response times.The included Ag scavenger prevents silver fouling into the process and diaphragm blockage in processes containing sulfide or proteins.

6.09331.310

The ProTrode 250 sensor is a combined pH sensor with integrated Pt1000 designed to perform inline pH measurements in chemical processes which require demanding sensor specifications. The pressurized inline pH sensor has a measuring range from 0 – 14 pH and a unique sleeve diaphragm design, which enables very accurate pH measurement, with low response time’s independent of process flow.

6.09331.410

The ProTrode 350 sensor is a combined pH sensor with integrated Pt1000 designed to perform inline pH measurements in chemical processes which require demanding sensor specifications. The pressurized inline pH sensor has a measuring range from 0 – 14 pH and a ceramic pin diaphragm design, which enables very accurate pH measurement, with low response time’s independent of process flow.

6.09395.014

Electrode tip made of glassy carbon (GC) for Autolab RDE, electrode disk diameter 3 mm, M4 thread connection. Temperature range: 0 - 40 °C.

6.09395.024

Electrode tip made of platinum (Pt) for Autolab RDE, 3 mm electrode disc diameter, M4 thread connection. Temperature range: 0 - 40°C.

6.09395.034

Electrode tip made of gold (Au) for Autolab RDE, electrode disc diameter 3 mm, M4 thread connection. Temperature range: 0 - 40°C.

6.09395.044

Electrode tip made of silver (Ag) for Autolab RDE, 3 mm electrode disc diameter, M4 thread connection. Temperature range: 0 - 40°C.

6.1110.010

Pt1000 temperature sensor (class B) made of glass with fixed cable (0.5 m) for connecting to a 909 UV Digester.

6.1110.100

Pt1000 temperature sensor (class B) made of glass.This PT1000 temperature sensor is also available under the article number 6.1110.110 with an installation length of 17.8 cm.

6.1110.110

Pt1000 temperature sensor (class B) made of glass for sample changers.

6.1110.120

Pt1000 temperature sensor (class B) for Professional CVS Instruments.

6.1111.010

Pt100 temperature sensor (length 17.5 cm) with fixed cable and mini-DIN-plug. This glass-free temperature sensor is well suited for use with a 711 Liquino and instruments for stability measurement (743 Rancimat, 763 PVC Thermomat, 892 Professional Rancimat, or 895 Professional PVC Thermomat).

6.1111.020

Pt100 temperature sensor (length 30.0 cm) with fixed cable and mini-DIN-plug. This glass-free temperature sensor is well suited for use with instruments for stability measurement (873 Biodiesel Rancimat and 893 Professional Biodiesel Rancimat).

6.1113.000

Sensor for 849 Level Control

6.1113.100

Sensor for Level Control MF

6.1114.010

Pt1000 temperature sensor (class B) with fixed cable (1.2 m), with a needle made of stainless steel and a PEEK shaft. This glass-free temperature sensor is well suited for measurements:in semisolid materials (e.g., cheese, meat); in non-oxidizing materials at pH 1 to 13;

6.1115.000

Optical sensor for photometric titrations offering 8 different wavelengths. The wavelength can be switched using the software (tiamo 2.5 or higher) or with a magnet. The glass shaft is completely solvent-resistant and easy to clean. For example, this space-saving sensor is suitable for:Non-aqueous titrations in accordance with USP or EP; Determinations of carboxyl end groups; TAN/TBN in accordance with ASTM D974; Sulfate determination; Fe, Al, Ca in cement; Water hardness; Chondroitin sulfate in accordance with USP; The sensor is not suitable for determinations of concentrations via measurement of color intensity (colorimetry).

6.1116.000

The optical sensor for measuring dissolved oxygen (DO) can be used with a 913 pH/DO meter or with a 914 pH/DO conductometer. The measuring principle of the sensor is based on luminescence quenching. The space-saving and maintenance-free sensor is suitable for DO measurement, for example in: Water quality control; Wastewater industry; Beverage production; Fish farming; This sensor is supplied with a calibration vessel. Where necessary, it is easy to replace the measurement cap (O2 cap) that contains the oxygen-intensive luminophore.

6.1204.130

Metal electrode tip, silver (Ag). Electrode disk diameter 2 mm. M3 thread. Temperature range: 0 ... 40 °C.

6.1204.140

Metal electrode tip, gold (Au). Electrode disk diameter 2 mm. M3 thread. Temperature range: 0 ... 40 °C.

6.1204.150

Metal electrode tip, gold (Au), with lateral electrode surface. Electrode disk diameter 3 mm. M3 thread. Temperature range: 0 ... 40 °C.

6.1204.170

Metal electrode tip made of platinum (Pt), diameter of electrode disk 3 mm, polished surface, M3 thread connection. Temperature range: 0 - 40 °C.

6.1204.180

Carbon electrode tip from Ultra Trace graphite. Electrode disk diameter 2 mm. M3 thread connection. Temperature range: 0 - 40 °C.

6.1204.190

Metal electrode tip made of platinum (Pt), diameter of electrode disk 1 mm ±0.02 mm, polished surface, shaft made of glass, M3 thread connection. Concentricity error: < 0.2 mm. Temperature range: 0 - 50 °C.

6.1204.210

Driving axle for rotating disk electrode (RDE) with titanium axle for VA measuring stands, M3 thread.

6.1204.220

Driving axle for rotating disk electrode (RDE) with titanium axle and mercury contact for VA measuring stands, M3 thread.

6.1204.510

Driving axle for rotating disk electrode (RDE) with titanium axle for Professional VA/CVS instruments, M3 thread.

6.1204.520

Driving axle for rotating disk electrode (RDE) with titanium axle and mercury contact for Professional VA/CVS instruments, M3 thread.

6.1204.600

Carbon electrode tip made of Glassy-Carbon (GC). Diameter of electrode disk 2 mm ±0.1 mm, polished surface, shaft made of glass, M3 thread connection, concentricity deviation: <0.25 mm. Temperature range: 0 - 50°C.

6.1204.610

Metal electrode tip made of platinum (Pt), diameter of electrode disk 2 mm ±0.05 mm, polished surface, shaft made of glass, M3 thread connection. Concentricity error: < 0.3 mm. Temperature range: 0 - 50 °C.

6.1226.030

Non-silanized mercury drop capillary (10 pieces)

6.1226.050

Silanized mercury drop capillary (10 pieces)

6.1240.000

With PTFE capillary and ceramic diaphragm (3 mm)

6.1240.020

With ceramic diaphragm (D type).

6.1241.020

Electrode holder for VA auxiliary electrodes with lock bolt. For use with glassy carbon rod (6.1247.000) or platinum pin (6.1247.010).