856 Conductivity Module
2.856.0010
11 Reviews on SelectScience
- Feature overview
Conductivity measuring module as supplement to an existing Titrando system or "stand-alone" in combination with a 900 Touch Control. With the 856 Conductivity Module, not only conductivity and temperature can be determined, but also TDS and salinity. It supports state-of-the-art conductivity measuring cells, i.e. 5-ring measuring cells.
The Conductivity Module is equipped with two USB interfaces for connecting printers, barcode readers, or sample changers and four MSB interfaces for stirrers or Dosinos.
For use with OMNIS Software, tiamo software, or Touch Control unit. Compliance with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required.
Get to know 856 Conductivity Module
867/856 Modules
เครื่องมือวัดค่าความเป็นกรด-ด่าง, ปริมาณไอออน และค่าการนำไฟฟ้า ที่สามารถกำหนดรูปแบบการตรวจวัดได้Why 867/856 Modules?
Equip your 856 Conductivity Module
Scope of delivery and opt. parts (PDF)
Scope of delivery and opt. parts (PDF)- Optional parts
801 Stirrer
2.801.0010
Magnetic stirrer without stand for supplementing the Titrino plus, Dosimat plus, Titrandos, Sample Processors, 805 Dosimats and 780/781 pH Meters. With permanently attached cable for MSB (Metrohm Serial Bus).
5-ring conductivity measuring cell c = 0.7 cm-1 with Pt1000 (fixed cable)
6.0915.100
5-ring conductivity measuring cell with cell constant c = 0.7 cm-1 (guide value), with integrated Pt1000 temperature sensor and with fixed cable (1.2 m) for connecting to an 856 Conductivity Module.This sensor is suitable for measurements of medium conductivities (5 µS/cm to 20 mS/cm), e.g., in:drinking water; surface water; wastewater;
5-ring conductivity measuring cell c = 1.0 cm-1 with Pt1000 (fixed cable)
6.0915.130
5-ring conductivity measuring cell with cell constant c = 1.0 cm-1 (guide value), with integrated Pt1000 temperature sensor and with fixed cable (1.2 m) for connecting to an 856 Conductivity Module in combination with a sample changer.This sensor is suitable for automated measurements of medium conductivities (5 µS/cm to 100 mS/cm), e.g., in:drinking water; surface water; wastewater;
Conductivity measuring cell c = 0.1 cm-1 with Pt1000 (fixed cable)
6.0916.040
Conductivity measuring cell made of stainless steel with cell constant c = 0.1 cm-1 (guide value), with integrated Pt1000 temperature sensor and fixed cable (1.2 m) for connecting to an 856 Conductivity Module.This sensor is suitable for measurements of low conductivities (0 µS/cm to 300 uS/cm) in e.g., deion. water or for measurements in accordance with USP <645>.
แสดงเพิ่มเติม