930 Combustion IC DR (AJ)
2.930.9020
51 Recenzji/(je) na portalu SelectScience
- Przegląd funkcji
- Specyfikacja techniczna
The 930 Metrohm Combustion IC enables the analysis of halogens and sulfur in flammable samples of all types using inline combustion digestion (pyrohydrolysis) with subsequent ion chromatography determination (Combustion IC). It comprises all required components, e.g., the Combustion Module from Analytik Jena (2.136.0700), the 920 Absorber Module, the 930 Compact IC Flex Oven/SeS/Deg, the 800 Dosino for suppressor regeneration and the MagIC Net software.
If necessary, the 930 Metrohm Combustion IC package can be supplemented with an Autosampler for solid or liquid samples (MMS 5000 Autosampler). The entire analysis, including sample input and sample digestion, is completely automated and is completely controlled by MagIC Net.
Dowiedz się więcej: 930 Combustion IC DR (AJ)
930 Compact IC Flex
930 Compact IC Flex - jednokanałowy, wysokociśnieniowy chromatograf jonowy do rutynowych analiz laboratoryjnych. Pozwala na czułe oznaczanie anionów, kationów i substancji polarnych.Dlaczego 930 Compact IC Flex?
Wyposaż Twój 930 Combustion IC DR (AJ)![download]()
Pobierz akcesoria pdf
Pobierz akcesoria pdf- części w zestawie
- opcjonalne części
Metrosep A PCC 2 HC/4.0
6.1006.340
For anion preconcentration and matrix elimination. The enlargement of the packing bed increases the capacity of the two preconcentration columns completely made of PEEK. The high capacity is required primarily when matrix effects might cause an overloading of the preconcentration column or when samples with high ionic strength are to be analyzed.
Metrosep A Trap 1 - 100/4.0
6.1014.000
High-capacity anion column, which is used to purify the eluent flow. Even chemicals of the highest quality level, e.g. "Ultrapur" or "puriss", can still contain minimal anion contaminations. These are reliably held back by the Metrosep A Trap 1 - 100/4.0.This column is primarily used with gradient applications.
Metrosep I Trap 1 - 100/4.0
6.1014.200
The Metrosep I Trap 1 - 100/4.0 column is used to eliminate ionic, i.e. cationic and anionic, contaminants from aqueous solutions. Its use is especially recommended for the purification of the transfer water in combination with "MISP" or "Metrohm Inline Sample Preparation". Using the Metrosep I Trap 1 - 100/4.0 column can significantly reduce the influence of the transfer water on the system blank.
Piston tongs
6.1546.030
For pistons for 807 Dosing Units or cylinder units OMNIS.
Zobacz więcej
