AB-436
Installation instructions TitrIC flex I
Summary
The TitrIC flex I system is used for the fully automatic analysis of water samples using direct measurement, titration, and ion chromatography (IC). The following parameters are determined within a very short time: temperature, conductivity, pH, alkalinity, water hardness, and in parallel, the concentrations of individual anions. Additional Metrohm instruments can be incorporated in the existing system at any time and used to measure other parameters.
Analytical sequence
The sample is transferred from the first Pick&Place Module to the 930 Compact IC Flex for the anion analysis. At the same time, the conductivity is measured. Following this measurement, the exact sample volume is transferred into the sample beaker of the second Pick&Place. Afterwards the temperature, pH, acid capacity (p and m value), and the hardness of the sample are determined.
The entire procedure is controlled by the MagIC Net software. The user only enters the sample position and sample identification into MagIC Net. All liquid handling steps as well as the titration part are done by OMNIS. MagIC Net triggers the individual sequences in OMNIS and receives the titration results via RS-232.
All data is summarized in a joint database containing all results by MagIC Net as well as the numerical values from OMNIS.