Automation for KF Titrando
Oven sample changer: Automated sample preparation for samples that cannot be titrated directly.
The oven sample changer was developed by Metrohm to automate thermal sample preparation. This enables you to process high numbers of samples that cannot be directly titrated volumetrically or coulometrically fast and more precisely.
- Eliminate manual work steps
- Increased precision and comparability of your results through automation
- High level of accuracy thanks to heated transfer tubing
- More functionality through software control
- Own sample vials can be used with a customised system
Brochure: 885 Compact Oven Sample Changer (8.885.5001, PDF, 329 KB)
Brochure: 874 USB Oven Sample Processor (8.874.5002, PDF, 648 KB)
Difficult samples? No problem!
The oven method enables you to analyse samples that cannot be titrated directly. This might be the case for various reasons, e.g., because your sample:
- does not dissolve easily,
- releases the water only at high temperatures, or
- reacts with the KF reagent.
The oven method involves heating the samples and transferring the evaporated water to the titration cell by means of a dry carrier gas. As only the water gets in contact with the KF reagent, the electrode and the titration cell are not contaminated, and carryover or memory effects that could distort the results are excluded.
More precision in less time
Using an oven sample changer, the sample is contained in sealed vials, meaning that the water content remains unchanged.
In addition, the sample changers have a heated transfer tube. Condensation in the tube is therefore excluded while the water is being transferred to the titration vessel.
The choice is yours
The 885 Compact Oven Sample Changer encapsulates convenience and easy operation – the only parameters that you have to define are the oven temperature and the gas flow:
- Very small footprint
- Integrated control panel for stand-alone operation
If you are looking for more flexibility and functionality, the 874 USB Oven Sample Processor is the right choice:
- Controlled with the intuitive and powerful tiamo software or the modern OMNIS software, allowing you to work out the optimum heating temperature of an unknown sample by recording a heating curve
- Option to automate reagent exchange, and thus avoid having to open the titration cell and possible exposure to the toxic reagent
- Option to use your own sample vessels
Talk to your Metrohm representative and learn about the best solution for your needs!