Byli jste přesměrováni na vaši místní verzi požadované stránky
Vyžádat nabídku

Vyhledávání v FAQ

Upravit podle
261 FAQS
  • FAQ
    What is actually stored in a determination?
    // Determinations
  • FAQ
    Rise in the values during titer determination with disodium tartrate dihydrate
    // Titer determination
  • FAQ
    The titration curve shows a flat line, i.e., no change in signal.
    // General
  • FAQ
    Which MagIC Net versions are there?
    // MagIC Net
  • FAQ
    The result is higher than expected.
    // General
  • FAQ
    How is the data transmitted?
    // Database
  • FAQ
    What can I do to improve the reproducibility of the results?
    // Problems with the execution of a determination
  • FAQ
    The following error occurs: «Restoration not possible (015-137). Problems copying the database. Restoration cannot be carried out at present. Try again later.»
    // Backup
  • FAQ
    Can I inject samples from one sampler into two IC systems that are independent of one another?
    // Chromatography
  • FAQ
    After installation user rights were different, in that the user logged on during installation has full (or special) rights.
    // Installation
  • FAQ
    How to prevent side reactions?
    // Sample handling, Sample processing
  • FAQ
    Can the platinum electrode tip be treated in an ultrasonic bath?
    // Maintenance of Rotating Disk Electrodes// Rotating disk electrode
  • FAQ
    How should the electrodes be stored?
    // General problems
  • FAQ
    Solution is leaking between the 894 Professional CVS and the measuring head.
    // Problems with the hardware
  • FAQ
    How do I use the MCS?
    // Suppression
  • FAQ
    How do I treat fusible solid samples?
    // Application-related// Preparing the reaction vessel
  • FAQ
    Can registered users be deleted from MagIC Net?
    // MagIC Net
  • FAQ
    Are CVS measurements temperature-dependent?
    // Problems with the measurement
  • FAQ
    The measured values are widely scattered.
    // Problems with the measurement
  • FAQ
    How can databases be backed up?
    // Database
  • FAQ
    How do I protect the column against particles and unwanted components?
    // Columns
  • FAQ
    Which tiamo versions work with which Windows versions?
    // General (tiamo)
  • FAQ
    How can I retrospectively change the client ID?
    // Configuration
  • FAQ
    Can I reuse the reaction vessel?
    // Hardware-related// Preparing the reaction vessel
  • FAQ
    Conditioning is taking a long time and a standard deviation < 0.5% cannot be achieved.
    // Problems with Dilution Titration (suppressor determination)
  • FAQ
    How to carry out the titer determination?
    // Titer determination
  • FAQ
    Is it possible to repair a defective driving axle (6.1204.x010 or 6.1204.x20)?
    // Problems with the measurement
  • FAQ
    Do norms/standards exist for biodiesel and biodiesel blends?
    // Method setup-related
  • FAQ
    The retention times change with each new eluent. What can I do?
    // Eluent and standards
  • FAQ
    How can I check that my "Sample data" in a "Sample table" are complete?
    // Chromatography
  • FAQ
    What is the optimal substance weight for titer determination?
    // Titer determination
  • FAQ
    Printing does not work
    // General (tiamo)
  • FAQ
    Does the position of the PTFE tubing in the measuring vessel play a role?
    // Hardware-related// Preparing the measuring vessel
  • FAQ
    How can I polish my gold RDE?
    // RDE (Rotating Disk Electrodes)// Maintenance of Rotating Disk Electrodes
  • FAQ
    How do I make sure that my device is stopped at the end of a "Determination series"?
    // Chromatography
  • FAQ
    The peaks exhibit extreme broadening.
    // Maintenance Troubleshooting
  • FAQ
    I would like to determine the thermostability of PVC. Which method should I use and will I need any special accessories?
    // Method setup-related
  • FAQ
    Why are the values found too high?
    // Sample handling, Sample processing
  • FAQ
    When installing clients in client/server systems (tiamo multi) you must always be logged onto the server in Windows.
    // Client server
  • FAQ
    The evaluation criterion has been reached. However, no results are being displayed.
    // Problems with Dilution Titration (suppressor determination)
  • FAQ
    I observe increased peak broadening although the column is new. What could be the cause?
    // Connections
  • FAQ
    The peak areas are smaller than expected.
    // Maintenance Troubleshooting
  • FAQ
    The measured values exhibit excessive scattering.
    // Maintenance Troubleshooting
  • FAQ
    The titration does not finish. What could be the cause?
    // Sample handling, Sample processing
  • FAQ
    Can I determine the shelf life of my sample using the Rancimat?
    // General
  • FAQ
    Can I reuse the reaction vessel cover?
    // Hardware-related// Preparing the reaction vessel
  • FAQ
    Which mercury can I use for polarography?
    // Installation of Multi-Mode Electrode pro// Multi-Mode Electrode, Multi-Mode Electrode pro// Installation of Multi-Mode Electrode pro// Maintenance of the Multi-Mode Electrode pro// Maintenance of the Multi-Mode Electrode
  • FAQ
    Is it possible to delete a client in a client/server environment from the list of registered clients?
    // Client server
  • FAQ
    Can Metrohm polish platinum electrode tips?
    // Maintenance of Rotating Disk Electrodes// Rotating disk electrode
  • FAQ
    Individual peaks are too large.
    // Maintenance Troubleshooting