Automated TAN/TBN analysis
MATi 02
- Přehled vlastností
PC-controlled, fully automatic analysis system for the direct determination of TAN or TBN values in mineral oil products in series of up to 59 samples. The analysis is carried out in accordance with ASTM standards D664 and D2896. The system is noteworthy for its special resistance to the solvents used in this application. The data acquisition and the complete control of the system takes place via the proven OMNIS software.
Vybavit Váš Automated TAN/TBN analysis![download]()
Stáhnout PDF s příslušenstvím
Stáhnout PDF s příslušenstvím- Součásti dodávky
- Volitelné součásti
786 Swing Head
2.786.0040
Additional equipment for Robotic Sample Processors XL without titration or transfer heads.
800 Dosino
2.800.0010
The 800 Dosino is a drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).
802 Stirrer for sample changer
2.802.0020
Rod stirrer for sample changer and Sample Processor.With 104 mm 6.1909.020 stirring propeller and permanently installed cable.
815 Robotic USB Sample Processor XL (1T/0P)
2.815.0030
Robotic USB Sample Processor XL with one workstation for the automatic processing of routine samples in series with large quantities and for complex sample preparation or parallel runs. Up to two pumps (membrane or peristaltic) and three dosing devices for Liquid Handling tasks can be connected.Because of the multitude of application variants, rack, stirrer, titration head, robotic arm, Swing Head and sample vessels must be tailored to the application and ordered separately.The control is "stand alone" using Touch Control. The following software products can be selected for the PC control: tiamo™ titration software, MagIC Net chromatography software, viva voltammetry software, or OMNIS.
Zobrazit více
